How To Get Your Phone Out Of Headphone Mode

Various tips and tricks to go out of "Headphone Style" on your iPhone.

Sometimes, even the simplest of things could be super annoying.

Imagine getting an emergency video call from your boss while you lot're outside. As soon as you hitting "Answer", yous come across that your dominate' lips are moving, but realize that there's no sound.

What'south happening?

Equally you silently expletive at your phone for acting up on that ane important moment, yous hit "End Telephone call" while signaling to your boss that you'll phone call back. Bummer.

You check your iPhone's settings afterward merely to detect out that information technology says headphones are in when they are not.

Disabling Headphone Mode — Disabling Headphone Style

Equally weird as information technology is, it's actually one of the few known quirks in iPhones. The good news is, it tin be easily fixed in about cases.

Why Do iPhones Get Stuck in Headphone Fashion?

It could be acquired by a number of things, either on the hardware or software side. iPhones have a tendency to go stuck in headphone mode for some reason. Some of which might include:

Moisture or grit build-up on the headphone jack port
Software error acquired by an app or an Os update
You lot disconnected the headphones/earphones while the phone is busy
Utilize of faulty or low-quality headphones (that could have caused some damage on the earphone port)

These are just a few potential causes, but the truth is, it can only randomly happen for no apparent reason.

But as we've stated before, you can probably fix it using a couple of steps that nosotros'll share with you lot in a bit. So if you lot're fix, let'southward accept a expect at our starting time set of fixes that yous tin perform without needing any tools or special apps.

Software Problems: Uncomplicated Software Fixes to Get iPhones Out of Headphone Fashion

On the software side, the iPhone "thinks" it still has headphones plugged in and then we're going to try a couple of things to "fob" it into exiting headphone manner.

The thought is to force the device to run its algorithms by restarting the telephone, switching sound channels, changing network settings, or enabling flying mode

Let's accept a closer look at each ane.

Plug and unplug your headphones

The quickest and most obvious solution (if it works). All yous need to exercise is to gently pull out the headphone jack from the port for a few seconds then plug information technology dorsum in.

Phones "know" when a headphone is continued via the excursion points in the 3.5mm port when they make contact with the ones in the jack. As soon as this happens, the telephone will run its default algorithms to instruct its software to relay audio to the headphones.

Hopefully, somewhere along this quick unplug-and-plug process, the software gets a reboot and could now correctly recognize if headphones are plugged in or not.

Restart your iPhone

If the step above doesn't work, the next footstep is to restart the phone itself. This will allow the software to reboot and get a fresh start which hopefully lets it correctly recognize if there's a headphone connected to information technology.

To restart your iPhone, but follow these steps:

For an iPhone X or 11

Printing and concord the book button or side push until the power off slider pops upwardly.
Elevate the slider towards the Plough Off option.
Printing and hold the side push button over again until you meet the Apple logo to turn it back on.

For an iPhone SE (2d generation), viii, seven, or 6

Press and hold the side button until you run into the Power Off slider.
Drag the slider towards the Turn Off option.
Press and hold the side button over again until yous see the Apple logo to turn information technology back on.

For an iPhone SE (1st generation), 5, or before

Press and agree the push button on the top-right part of the telephone until the Ability Off slider option appears.
Drag the slider towards the Turn Off pick.
Press and concur the side push button again until you run into the Apple logo to turn it back on.

Enable and disable Airplane style

Plane Mode is a setting in smartphones and tablets that lets you lot chop-chop turn off cellular, voice, WiFi, and Bluetooth connections.

This fix works best for Bluetooth headphones just is also worth a shot even when you lot're using wired ones.

The quickest way to activate Airplane Fashion in iPhones is via the Control Console.

For an iPhone Ten or 11:

Swipe down from the top-right portion of the screen.
You'll see a button with an image of an plane on it.
Click on it one time to turn information technology on.
Click on it over again after a few seconds to turn it off.

For iPhone SE (2nd generation) or earlier:

Swipe up from the bottom border of the screen.
You'll see a button with an image of an airplane on it.
Click on information technology once to turn it on.
Click on it again after a few seconds to plough it off.

Connect to a different audio source or change audio output

Some other way of rebooting the iPhone's algorithm dorsum to its normal country (without the headphone mode issue) is by connecting information technology to another audio source or changing its audio output (connecting to Bluetooth speakers or HomePods for example).

To change the sound output, follow these steps:

On your iPhone, go to Settings -> Bluetooth. Click the button to turn it on.

How to change audio output via Bluetooth in iOS
Switch on the Bluetooth speakers, HomePod, or whichever wireless audio output device you lot have.
Pair your iPhone to the device. Play a test file to meet if the connection was successful.
Once done, disconnect then cheque if your iPhone is no longer in Headphone mode.

If you're using iOS 11 and up, yous can click on the AirPlay button within the Command Middle to check if "iPhone" is included every bit 1 of the sound output options. If it is, tap it to instruct the iPhone to relay the audio to your telephone'south speakers.

Select iPhone in Control Center — Select "iPhone" in Command Center

Reset your Network settings

The last trick in our listing of fixes via iOS' own software is resetting the network settings. Our goal hither is to essentially "re-format" all saved and existing connections (which includes Bluetooth headphones) to mayhap force the telephone to rerun its algorithms which hopefully reboots headphone mode back to its normal land.

To reset your iOS Network Settings, follow these steps:

On your iPhone, go to Settings —> General

Resetting iOS Network Settings
Select Reset —-> Reset Network settings.

How to reset iOS Network Settings

Resetting your network settings will remove all passwords and saved settings for all connections

This move will reset all your network settings (Cellular, WiFi, Bluetooth, etc.,) and remove all the passwords to connected devices

Hardware Issues: Hardware Fixes to Get Your iPhone Out of Headphone Mode

If none of the above fixes worked, then perhaps it's a hardware issue.

Firstly, you want to check that your headphone jack isn't stuck inside the port – because that would exist an obvious cause for concern. Following this, take a look within the headphone port. Is there any dirt, debris or lint stuck inside? This could exist the culprit.

Let'south dive into how you lot might ready this, and other, headphone-mode inducing problems.

Remove any lint, debris, or dirt from the headphone jack

Start by using a flashlight to illuminate the headphone jack port and run into if yous can spot any lint or dirt. Then, using a Q-tip or paper clip, gently insert it and clean the within of the jack. Run into the following steps for detailed instructions:

Use a Q-tip

Reduce the amount of cotton fiber at the ends of the Q-tip. In most cases, it'due south considerably larger than the 3.5mm port and then thinning it out a bit will help you lot get it in there for cleaning.
Gently insert information technology into the headphone jack and slowly plough to catch all clay or lint.

Using a Q-tip to clean the iPhone's headphone jack
Pull it out slowly and make clean any debris that's at present in the Q-tip.
Repeat steps 2 and 3 until you tin can no longer get any dirt in the Q-tips.

Use a paperclip (with record)

The idea is to brand a little lint roller that will catch dirt and droppings using a paperclip with a little strip of tape at the stop.
Get a paperclip and cutting out a tiny strip of tape.
Put information technology at the tip of the paper prune backward with the sticky side exposed. Make sure information technology's secure.

Using a paperclip with a pasty tape at the end to clean the headphone jack
Gently insert it and then move it around a trivial to catch all clay or lint.
Slowly pull it out once done.

Use compressed Air

This is the safest method as it doesn't require sticking any objects within the headphone jack.
Purchase a can of compressed air or handheld duster.
With the tip of the nozzle pointed at the headphone jack, spray it with three-iv short blasts of air.
Information technology should exist enough to force out any dirt or debris inside the headphone jack.

Check for water damage

If cleaning the headphone jack doesn't work, perhaps the consequence is caused by water harm. It'south possible that water or a significant amount of wet somehow got within the headphone jack.

Fortunately, there's a quick manner to check:

Using a sim ejector tool, pop out the sim carte tray.
Using a small flashlight or another lite source, shine a lite inside the headphone port.
If yous see a small crimson dot, it means that the Liquid Contact Indicator (LCI) has been activated. Information technology's a mechanism inside the iPhone that is triggered (turns cherry) when certain parts of the telephone get in contact with liquids.

At this point y'all have two options, the first is to take it to a repair heart. Or you lot can go the DIY route and try the post-obit tips to save your iPhone from h2o damage:

Take information technology out of the instance (if it has any) and remove the sim menu tray to let air in (and so more than air gets within to dry out the internals).
Leave it in a warm place, like a sunny windowsill or somewhere similar.
You lot can likewise apply silica gels (the small packets that you find in boxes of shoes or bottles of medicine) as they absorb wet that will assistance speed upwardly the drying process.
Another popular technique is to put it in rice. Put the iPhone inside a ziplock pocketbook together with some rice. Rice will assist blot moisture from the phone's internals.

Wrapping your headphones correctly

Did you know that leaving your headphones e'er plugged into the headphone jack could loosen its connexion to the motherboard?

When this happens, it increases the likelihood of damage that could lead to errors like getting your iPhone stuck in headphone mode.

Information technology's best to keep your headphones unplugged when non in use and stored in a protective example or pouch

How to Get My iPhone Out of Headphone Way if None of These Steps Piece of work?

If you lot've run out of luck and can't get out of headphone mode even after trying the steps above, then the next logical pace is to take information technology to an Apple-recognized center for repairs. Avoid 3rd-party shops that you're not certain you tin trust or rely on.

Conclusion

The adjacent time yous become your iPhone stuck in headphone mode, don't panic. Whether the event is acquired by hardware or software, there are plenty of ways to get it stock-still.

Past now, if you've followed some of the instructions that we've outlined above, there's a very high-gamble that you lot're no longer suffering headphone-mode troubles, or, having lip sync battles with your dominate.

Hopefully, we've helped y'all solve those problems, meaning your headphone issues are a matter of the past! Did nosotros help you get our phone out of headphone mode? What method did you use? If you lot have your own unique way of getting an iPhone unstuck out of headphone mode, we'd love to hear about it.

Let u.s. know in the comments below!